Guest Post by Willis Eschenbach
I got to thinking about the records of the sea level height taken at tidal stations all over the planet. The main problem with these tide stations is that they measure the height of the sea surface versus the height of some object attached to the land … but the land isn’t sitting still. In most places around the planet the land surface is actually rising or falling, and in some places, it’s doing so at a surprising rate, millimeters per year.
The places that are the most affected, unfortunately, are the places where we have some of the longest tidal records, the northern extra-tropics and northern sub-polar regions. In those sub-polar regions, during the most recent ice age, there were trillions of tonnes of ice on the land. This squashed the land underneath the ice down towards the center of the earth … and as result of that, just like when you squeeze a balloon it bulges out elsewhere, the extra-tropical areas further from the North Pole bulged upwards in response to the northern areas being pushed down.
Now, of course, other than scattered glaciers all of that ice is gone. With that weight removed the land is now experiencing the reverse effect. This is called “post-glacial rebound”, or PGR. The effect of the PGR is the reverse of that of the ice—northern areas are rising and mid-latitude areas are sinking. So when we look at long-term records from northern Europe, for example, the land is actually rising faster than the sea level … and as a result, the tide gauges there are recording a sea level fall rather than a sea level rise.
The issue comes up when we want to know how fast the sea level is rising, both now and in the past. Unfortunately, most tide gauges around the planet don’t have co-located GPS units capable of measuring the altitude to the nearest millimeter…
Me, I’m not that interested in exactly how fast the sea level is rising. I’m much more interested in whether that rate of sea level rise is speeding up. For three decades now climate alarmists have been predicting an imminent acceleration in the rate of sea level rise that is supposed to drown whole cities by 2100, the usual Chicken Little scenario. However, I’ve not seen any convincing evidence for that claimed acceleration.
My thought about how to investigate the purported acceleration was simple. I’d get every one of the tide records, the most recent I could find. These are kept at the Permanent Service for the Mean Sea Level, or PSMSL. They are obtainable individually here or in bulk here. As the curators recommend, I used the RLR version.
Then I’d detrend them all. That would remove any post-glacial rebound. The PGR, whether slow or fast, doesn’t change much in a couple centuries. So detrending would set the PGR to zero. This would allow me to look at the average shorter term multidecadal variations in sea level. I would average the records, and see what kind of acceleration I might find in the results.
I thought about this while reading GLOBAL SEA RISE: A REDETERMINATION, by Bruce C. Douglas, available here. In it, he averages a subset of the 1509 stations after adjusting them for post-glacial rebound (PGR). However, he’s picked a tiny subset, only twenty-four stations … out of the more than 1500 tide stations available worldwide. Hmm … seemed like a very small sample.
So I thought I’d take a look at some other subsets of the tide station data. I decided to filter based on a couple of criteria. One was that I wanted to have long records. So I started with a hundred years minimum. No particular reason, it just seemed like a good place to start.
The other criterion was that I wanted them to be mostly complete, with little missing data. I started with the requirement that they be ninety percent complete. I expected that I’d find only five or ten such stations around the globe, but to my surprise, I found that there are no less than 61 tide station records that meet those criteria.
Following the usual method, I took the “first differences” of these individual sea level records. This is the change in the data over time. Since we have monthly data, the “first differences” in this instance are the month-to-month changes in the sea level for each tide station.
Then I averaged those first differences, month by month. Finally, the cumulative sum of that average of the first differences reconstructs (in theory) the average change in sea level height.
Figure 1 shows the result of that procedure. Remember that this is detrended data. I’m not looking at the trend. I’m looking at the decadal and multidecadal variations within the overall record, to see where the trend changes.

Figure 1. Averaged sea level. The average was taken as the cumulative sum of the month-by-month average of the individual station first differences. No standardization of standard deviation was performed. The yellow line is a six-year centered Gaussian smooth. I put the ocean in the background because … well, because I got bored with plain white, plus … it’s the ocean …
OK, nothing much surprising there. Yes, I know I haven’t made any effort to do a gridded or other geospatial average … but I find that for first-cut investigations the differences aren’t worth the programming time. That can come later to refine the results. First I want to take a broad view and come to an overall understanding of the oddities and the outliers and the overall style and substance of the dataset.
Now, in Figure 1, sixty-one records is not a whole lot. So my next thought was to reduce the completeness threshold a bit. I decided to look at all the hundred-year-long records which contain at least eighty percent data, instead of ninety percent. That increased the station count from sixty-one to seventy-one. And the result was what I love the most about science … a big surprise.

Figure 2. As in Figure 1, except only requiring 80% data instead of 90% data.
Dang-a-lang, sez I, say wut?!? … and I went off to find the fault in my computer program that extracts the data and draws the plots.
However, when I couldn’t find anything wrong with my program, I realized that the answer had to be somewhere in the ten additional stations that were added in between Figure 1 and Figure 2. Here are those ten stations:

Figure 3. The ten stations which were added to the subset between Figure 1 and Figure 2.
You can see the problem, I’m sure. What is going on with the tide record from the Manila South Harbor? So I pulled Manila South Harbor out of the mix … which led to big surprise number two.
Pulling out the Manila record made no particular change. The result still had the big drop seen in Figure 2.
After much faffing about, I finally determined that the miscreant was actually Trois-Rivieres, which is certainly not obviously different from its compatriots. It’s second from the bottom left in Figure 3 above, looks like the rest … except in size. I’d made the mistake of not paying attention to the different scales. Here’re the same ten stations, but this time all to the same scale.

Figure 4. As in Figure 3, but with all stations shown at the same scale.
In this view the problem is evident. We’re doing a “first differences” analysis. But that weights the data in some sense proportional to the stations’ standard deviation, how much it swings from month to month.
Setting that question aside, however, the surprising part to me was the large effect of one single record among 71 others. One bad actor in the lot totally changed the whole average … and it brings up a question for which there is no “right” answer.
How do we deal, not just with this instance of Trois-Rivieres, but with the more general underlying problem that the month-to-month variations in sea level are of very different sizes at different tidal stations around the globe?
Do we scale them all to the same standard deviation, to give them all equal weight? Or as in this case, is it valid to just heave Trois-Rivieres overboard and continue the cruise? Hang on, let me get a histogram of the standard deviations so we have some information. The standard deviation is a measure of how wide the swings in the data are … I’m writing this up as I work my way through the issues, so you can see how I go about understanding the dataset. Here’s the histogram of the standard deviations:

Figure 5. Histogram of the standard deviations of 1,509 tide stations.
OK, that’s a problem for this kind of analysis. This shows a bunch of stations with standard deviations over say 150 mm … and as we saw above, to my surprise, just one wide-swinging station can poison seventy other stations. So any analysis will be dominated by the widest-swinging datasets. Oooogh. No bueno.
As I said above, there’s no “right” answer to this question. About all that I can see to do is to set them all to the median standard deviation, which is about ninety mm. This gives them all equal weight and also makes them comparable to the raw data. Figure 6 shows the same 71 hundred year plus stations as in Figure 2, but this time after they’ve been set to the same standard deviation. Note that Trois-Rivieres is no longer dominating the results.

Figure 6. Averaged sea level. The average was taken as the cumulative sum of the month-by-month average of the individual station first differences. All first difference station data was set to a standard deviation of 88 mm before averaging the first differences.
I think that’s about the best I can do. I say that because I’m interested in decadal and multi-decadal changes … and there’s no reason to assume that tide stations with large month-to-month swings are more representative of those multidecadal changes than any other stations. With no theoretical reason to prefer one group of stations over another, I can only give them all the same weight.
(Upon reflection while writing up my investigations, I just now realized we might also find interesting results by using a yearly average of the data. At least this would get rid of the month-to-month variations … but at the cost of throwing away some data. So many possible analyses, so little time … I return to the current analysis).
Now, I mentioned that I was led to look at this by the Douglas re-examination of sea level changes. So I thought I’d take a look at the twenty-four stations he used. Here’s that result. All the stations have similar standard deviations, so I’ve not made any adjustments. Unlike my own analysis these are not detrended. In addition, the trends have been adjusted for post-glacial rebound using the data from the Douglas paper.

Figure 7. Stations from Douglas GLOBAL SEA RISE paper. These stations have been adjusted for PGR using the data in the cited paper. Note that these have not been detrended.
Hmmm … I’m not seeing any reason to prefer that Douglas subset to any of the others. It is different from any of the others that we’ve seen in that there is a clear acceleration in the rate of rise around 1970. This has not been visible in any of the other datasets. However, my main objection is the tiny size of the sample, only 24 stations.
According to the cited Douglas paper, among other requirements, to be usable the individual tide station records should “be at least 60 years in length” and be at least “80% complete”. Here’s the subset of the 1,509 records, the 235 stations that fit those two criteria.

Figure 8. Averaged of detrended sea levels, sixty year + datasets with eighty percent data. All datasets have been standardized to a standard deviation of 88 mm. This is the median standard deviation of the full 1,509-station dataset.
That’s not much different from the hundred-year-plus dataset shown in Figure 6. Let’s see what happens when we reduce Douglas’s required length of sixty years down to say forty years …

Figure 9. Averaged sea level, forty year + datasets with eighty percent data. All datasets have been standardized to a standard deviation of 88 mm.
As you can see, once there’s very little difference from adding the additional shorter-length station records. Figure 6 shows hundred-year-plus records, only 71 stations. It differs only in the smallest details from Figure 9, which shows forty year plus records and averages 500 stations.
However, there is a final perplexitude. So far, we’ve been looking at records with 80% of the data … but what if we make the requirement stricter? How about if we require that ninety percent of the data be present? It turns out that, just as with the eighty percent criterion, the results at ninety percent look quite similar at records lengths from forty to a hundred years … but the oddity is that they do not look like the eighty percent records.
Here are all the sixty year plus records with ninety percent data, 193 stations:

Figure 10. Averaged sea level, sixty year + datasets with ninety percent data. All datasets have been standardized to a standard deviation of 88 mm.
As you can see, Figure 10 is similar to the eighty percent data shown in Figure 9 in that it has the high point at the start. It’s also similar in the range from about 1875 to about 1920.
From 1920 to the present, however, the eighty percent complete records go up in a pretty straight line … and the ninety percent complete records go down, again linearly. Who knew?
So, after that voyage through the 1,509 records, what can we say? Well, we can’t say anything about the trend, because we’ve been using detrended records. Heck, we can’t even say whether there was a change around 1920, because the records with eighty percent data say yes, the rate of rise increased around 1920 … but the ninety percent records say no, there was no change in the rate around 1920.
However, something that we can say is that the one and only subset I’ve found that shows any recent 20th-century acceleration is the extremely small 24-station subset used by Douglas. It claims that there was an acceleration in the rate around 1970 or so.
All the other subsets we’ve looked at agree, eighty and ninety percent data alike, at all lengths from forty years plus to a hundred years plus. They all say that there has been a uniform gradual sea level change since around 1920, a change which has varied little over that time. In detrended terms, some subsets say it went up since 1920, some say it went down since then.
But not one of them show any recent acceleration in the rate of sea level rise.
In other words, despite thirty years of alarmists telling us that the seas are going to start rising at some accelerating rate any day now … there is no sign of that predicted acceleration in any of these subsets of the detrended tide station records. Of course, this doesn’t prove anything, you can’t prove a negative. However, it joins all the other evidence out there showing no recent acceleration in sea level rise.
My final thought out of all of this is that the sea level data from the tide gauges around the world is very sensitive to the exact selection of the subset of stations used in any analysis. There are differences even what I would have thought would be a trivial change in cr, say between eighty and ninety percent data for all stations over sixty years in length, which only went from 193 stations at ninety percent data to 235 stations at eighty percent data. And despite the fact that both groups contain datasets with what we would call good coverage, and despite the two datasets having over 80% of the stations in common … despite all of that, changing the requirement from eighty percent complete to ninety percent changes the overall change in trend since 1920 from rising to falling …
So I’d say the takeaway message is, be cautious in claims regarding the sea level rise speeding up. I’ve looked a lot of places for acceleration without finding any sign of such an increase in the rate of sea level rise, and this latest peregrination through the tidal data has only strengthened my skepticism about any claims made about the global sea level. It’s just too dependent on the methods used and the choices made to give me any sense of solidity.
Here, I’m very happy to be back from my Solomon Islands adventure. Before I left I had just finished building a large patio here by our hillside home. I rented a backhoe, bought a few pallets of blocks and bricks, and started digging and filling. Then when the rough backhoe work was done … shoveling. And more shoveling. What in a less politically correct time we called “Playing the Swedish banjo”. Here’s a shot halfway through the process with the downhill retaining wall in but not the uphill wall, featuring my weapons of mass construction, a McCloud and a couple shovels, plus my hand grader (a board attached to a rake) at the far right …

Once the level spot was made I had to decide how to treat the flat surface. I decided to brick it in. My artistic vision was to make what would look like a river of bricks running out from under our house to a pool, of brick of course, and then flowing out from that brick pool over the rapids at the far end of the patio where the retaining wall stops.
And here’s how it looked shortly before I left, with my gorgeous ex-fiancee tending her beloved plants …

And finally, here it is this lovely warm December morning upon my return, with verdant, insistent nature starting to push up through the spaces just like I’d hoped … I plan to let it grow and periodically mow it short.

So, propped up against the south wall of our house, enjoying the physical realization of my vision of a river of bricks, and smiling like an idiot up at the sun, I remain,
Yr. Obt. Svt.,
w.
PS—Please, folks, when you comment I ask you politely to QUOTE THE EXACT WORDS YOU ARE DISCUSSING. I can defend my own words. I cannot defend your understanding of those same words. Without the quotation, I often have no idea what you are referring to. I know it’s perfectly clear to you … but on this side of the screen, it is often a total mystery just what it was that I said that someone thinks they are referring to. So do yourself and all of us a favor and quote before replying, so we can follow your logic and comprehend your argument.
Finally, no, generally I don’t remember what I said in some discussion with you six months, six years, or often even six days ago. I’ve written over six hundred posts for the web, many of which have engendered long and complex discussions with a huge number of people, with most of the people using fake names. I make no attempt to remember who said what, or what I said. Instead, I simply do my utmost to tell the truth as best I understand it at all times so I don’t have to remember all the trivia—if I need it I’ll look it up.
So please, if you’re going to say anything resembling “But Willis, you were wrong last time when you said that …” to me or anyone, please follow that with a quotation of the exact words that were said. NOT what you remember about those words. NOT what you’ve understood those words to mean. THOSE EXACT WORDS!
Thanks,
w.
DATA: The data in the PSMSL archive is in a horrible format, with a separate file for each station with individual start and end dates. I’ve combined them into the normal data block, stations in columns, times in rows, as a zipped CSV file here. So … if you have questions about the results or you think I should have done some other kind of analysis … the ball’s in your court. Drop the CSV sea level data file into Excel or your favorite program, do the analysis you think I missed or messed up on, and let us know what you find out.
Discover more from Watts Up With That?
Subscribe to get the latest posts sent to your email.
Mr Eschenbach, there is also the other affect not mentioned here which is created not by Tides but by winds.
There has been demonstrated a sort of “Slosh” affect where Sea Level is higher on one side of the “basin” than it is on the other due to prevailing winds..
https://www.ncas.ac.uk/en/climate-science-highlights/585-will-the-wind-impact-future-sea-level-change
http://www.nature.com/news/changing-winds-dampen-antarctic-sea-level-rise-1.14189
http://onlinelibrary.wiley.com/doi/10.1029/2010JC006492/abstract
Willis, did something happen to your spreadsheet when you saved it as a CSV file? This is what the file I got from your dropbox looks like:
HELIGMAN KOBBAKLINTAR LEMSTROM FOGLO / DEGERBY PAGO PAGO
1807 NA NA NA NA NA
1807.083333 NA NA NA NA NA
1807.166667 NA NA NA NA NA
1807.25 NA NA NA NA NA
1807.333333 NA NA NA NA NA
1807.416667 NA NA NA NA NA
Where there is something besides “NA” in the cell, it looks like this:
HELIGMAN KOBBAKLINTAR LEMSTROM FOGLO / DEGERBY PAGO PAGO
1886 NA NA NA NA NA
1886.083333 NA NA NA NA NA
1886.166667 NA NA NA NA NA
1886.25 NA NA NA NA NA
1886.333333 NA 7085 NA NA NA
1886.416667 NA 7163 NA NA NA
Should I format the cells somehow?
The file seems fine to me. Did you check “comma” as the way to line everything up? Once you get it, you can use Find and Replace to replace all the “NA”‘s with blanks. It took a bit of time but about 3 million or so replacements were made.
Thanks, Willis, for a very informative analysis, with interesting results.
Your patio looks great!, BTW.
A good example of the results of isostatic rebound is in the northern Ohio River Valley, from New Martinsville, WV, up to there the Ohio River turns south and forms the boundary of Ohio and West Virginia. This was shot from Grandview Park in Moundsville, WV, looking west over to the Rt. 7 road cut in Ohio. The bluffs are about 600′ above river level, and you can see that from the top of the bluffs, you’re looking across the ancient peneplain of the central Appalachian Plateau.
Don’t know what happened to my image. I’ll try just the straight URL instead of using the img tag.
http://s497.photobucket.com/user/jaschrumpf/media/ohio_valley_plain_isostatic_rebound.jpg.html
Didn’t notice the “html” stuck on the end there. One more try, from my own web site:

Very interesting article, Willis. I wish every single paper that made some ginormous conclusion based on a tiny statistical fluctuation that was published without a similar discussion of how the data might be confounding the question, were rejected flatly as being unfit-for-purpose. In climate science, Of course, Michael Mann and Bill Nye would not be happy about that.
If we presume that your graph represents the actual amount of water stored in all the ocean basins, there is a noticeable drop from about 1815 to 1850. Besides temperature, what other processes might help explain this drop? A few ideas:
– As the world warmed from the depths of the Little Ice Age (LIA), water levels SHOULD be rising as Greenland, Antarctic and alpine glaciers melt. But maybe with just a little extra warmth around the edges of Greenland and Antarctica this instead creates the opposite effect by increasing the amount of deposition on the two big ice sheets, removing water from the oceans for an extended period. I think it’s fairly clear that the ice levels of alpine glaciers is not part of this phenomenon, based on historical records.
– Human beings are busily populating all areas of the globe, building dams and reservoirs that hold water directly, and which funnel a certain amount of irrigation water onto fields, where the extra surface area of those fields and canals leads to a sort of humidity loop due to the extra evaporation from irrigated fields, which quasi-permanently removes that irrigation water from the oceans.
–
were rejected flatly as being unfit-for-purpose.
≠===========
strongly agree. make it a scientific standard. unless multiple methods agree, the mathematical result may well be spurious (false) by chance or subconscious bias.
this should be part of the discussion in every scientific paper. the experimental controls employed to prevent a false positive.
The drop 1815-1850 is not at all surprising. Glaciers everywhere expanded until 1850, then started retreating.
excellent work Willis. something that should be a scientific standard in all studies that rely on statistics or numerical methods. sensitivity analysis of the results.
what Willis has done is not simply show the acceleration in sea levels. what he has shown is how sensitive the result is to the method chosen.
all too often what passes for science are nothing more than “purple jelly beans cause cancer” type studies all dressed up in a wig and lipstick to hide what we are looking at is a pig.
I for one would very much like to see sensitivity analysis such as Willis has presented adopted as a formal requirement in scientific studies.
We have a HUGE problem in science with false positives. in large part because we have come to rely on peer review in place of replication to validate the science.
but peer review is no substitute for replication because it replaces observation with opinion.
by making sensitivity analysis a standard we are placing the onus on the author to provide some indication of how likely the results are to survive replication.
‘The main problem with these tide stations is that they measure the height of the sea surface versus the height of some object attached to the land … but the land isn’t sitting still. In most places around the planet the land surface is actually rising or falling’
Not the main problem. 70% of the earth is covered in ocean. The majority. We recognize ‘In most places around the planet the land surface is actually rising or falling,’ but we ignore it for the 70%.
No acceleration in SLR, via Dr. Roy Spencer:
http://www.drroyspencer.com/2017/08/an-inconvenient-deception-how-al-gore-distorts-climate-science-and-energy-policy/
Possibly Trois-Rivieres has been mentioned already. Throw it out. Its fresh water half way up the St Lawrence River. Its affected by seasons of rains and snows every year that the sea is not. It would be like a tide gage on the Mississippi at St Louis.
Good job (as usual), Willis. An interesting change that is evident in your data is an obvious change about 1850. I’ve seen this in other datasets too. Something profound happened to sea level about 1850 and thereafter. What caused this change? It happened near the beginning1850-1880 warm period, but we’ve been thru several periods of warming and cooling since then with not much change.
I wondered about that also Don. I suspect what happened is that the sea started to warm from LIA temperatures and the very uppermost layers started to expand. Over time, the warmth has worked downward? But I have neither data nor calculations to support that guess.
A useful summary of how geophysical signals are taken into account when using tide gauge data
http://www.psmsl.org/train_and_info/geo_signals/
Thank you for the hard work thank you for the hard work. It appears using stations can only afford local result. Other tools will need to be invented and
investigated. What about W. I. S. E. Data?
Help!
My problem is more basic. Somehow I’ve never been able to grasp how we derive millimeter estimates of sea level heights. Much less the second or third derivative of height. It appears our best guess is derived from using GPS to tie everything together.
Satellites fly in an equipotential gravity field independent of where we think the surface of the sea is so they represent a reasonably stable reference from which we might derive a sea level estimate… if we know where we are in relation to the GPS satellite. We use Kalman filtering to estimate the positions of the GPS satellites relative to land tracking stations that are subject to isostatic adjustment. We model the geoid in reference to the ITRF which itself has uncertainty, we use an ellipsoid model in conjunction with a geoid model. We derive a sea level height in relation to the GPS satellite constellation by measuring the distance to a constantly changing sea surface subject to tides, long period waves, and barometric pressure effects with a satellite radar altimeter which does not have the ability to measure millimeter accuracy. Then we define sea level using the ellipsoid and geoid models that differ in elevation by almost 200 mtrs around the globe.
I’d be more concerned about a few millimeters here and there if I understood how we manage to derive such high confidence accuracy and precision from what appears to be such a relatively coarse measurement process.
Bean Barrett
an hour ago
Bean, precision has to do with repeated estimates. If you measure the sea level every ten minutes or so for a year, say, and you average the measurements, you will know the average sea height to a very good precision.
As to the measurements, they are typically done in a “stilling well”. This is a vertical pipe connected to the ocean by a small hole, so it is not affected by the waves. These days the height of the water in the stilling well is measured acoustically.
Not sure if this answers your question, but it’s what we’ve got …
w.
Bean. I don’t think it works quite like you suggest, but your question is still a good one. As I understand it, the satellite position is obtained from DORIS which is a French system that works sort of like an inverse GPS. Signals come from fixed ground stations. The satellite uses the time delays and the signal doppler shift to compute its position.and velocity. Since, unlike GPS satellites, the ground stations don’t move, the position uncertainty is lower than with GPS. But there are still ionospheric and tropospheric delay uncertainties?
I don’t think “they” worry (much) about mapping, the geoid, et al. Except maybe to correct for tides and barometric pressure. But you probably don’t need high precision positions for those corrections.
I believe the RAs operate at a high pulse repetition frequency — maybe 3KHz? Given a 1km radar footprint, I can believe that they manage to pretty much cancel out wave height variations. But they still have ionospheric delays. They have multifrequency capability and some capability to compute delays from the time difference between the signals at different frequencies. Sounds good, but I don’t know the details.
Finally there’s the problem even without waves, the surface of the sea is anything but flat and the bumpiness is a function of longitude as well as of latitude. That probably means that you can’t simply average the latest measurement with the measurement made 100 seconds ago with the one made 200 seconds ago. You very likely can only compare measurements with those made at the same location in previous cycles. A cycle is ten days.
There may well be a good detailed description somewhere of how they do things. I haven’t seen it.
So, I like you, would like to know exactly how “they” come up with sub mm precision.
I’m new to posting here, so please forgive my ignorance. This is very interesting, but I have a couple of questions:
1. Am I correct that you “detrended” each station independently?
2. What is the difference between Douglas’ “adjust for PGR” and your “detrend?”
3. Could you show a “detrended+s.d. adjusted” view of the 24 Douglas stations using your methodology?
4. Could you show a graph of your 61 stations in all four states? (Raw, s.d. adjusted, detrended, detrended and s.d. adjusted?) This would help me understand the effects of each process…
5. Did you look for correlation in the “trends” of geographically adjacent stations? Does this support your method of “detrending” PGR?
TIA
Thanks, Mike. Ignorance is never a problem on my planet, because on my planet, the only stupid question is the one you don’t ask …
1. I detrended each station independently
2. I removed the trend from any source. Douglas removed (in theory) the trend from PGR.
3,4. I could, but … time. As in, so many analyses, so little time. IF I get around to it, I’ll certainly post up my results … it’s what I do.
5. No … but we know the GPS-measured movements are correlated over wide areas, viz:
Best New Years wishes, keep asking questions …
w.
I’m more interested in what the tide gages measure – the sea level relative to where I live – on the land.
A timely and interesting post – thanks.
Timely because last night on a BBC program I heard this
“Sea levels have risen 20cm in the last century and may rise 100cm in this century”
Leaving aside the usual caveats – it was jus the nonsensical argument that the levels might go up 5 Times the amount of the 20thC. And we are already 18% through this one!!!
Makes no kind of sense to me – before even looking at the maths !!!
And talking of sea level change…
Whatever happened to that project which looked at old masters paintings (of coastal areas) and comparing these to currrent day photographs?
Basic tide change: Let’s assume that the major force affecting tides is the combined gravitational force of the sun, earth and moon. These forces are in constant motion at each tidal gauge as the earth rotates, orbits the sun, and as the moon obits earth. The relative position of these bodies has to affect tide levels at any given time ; hourly, daily, monthly et cet. How are these factors calculated when comparing different tide level locations and measurements?
Good question, Joseph. Generally, what we do is use long-term tide measurements, fifty years or more. These are long enough that the tidal forces you mention above average out, leaving us with just the inherent rise or fall of the ocean.
w.
It’s even more complicated than you think. Tides are heavily affected by coastal topology. Wikipedia has a lengthy and, so far as I know, correct, article on tides https://en.wikipedia.org/wiki/Tide
I’d like to make an observation. Temperature readings used to be tied in to agriculture, and then became part of aeronautics. They were considered a fairly local phenomenon. So, too, were tidal readings, as part of shipping in a local area. None of these readings were meant for anything other than local conditions. Therefore, though both temperatures and tidal readings can be associated with other readings, in different locations, it should be done with great care. Each observer was probably following local protocol, because the reading was meant for the local area.
Of course, there are protocols for normalizing such data, as Mr. Eschenbach demonstrates. However, we should keep that little niggling thought in the back of our minds, that we are trying to stitch together a tapestry of pieces that don’t really fit very well. At some point, if these readings in different locations are going to be compared, there needs to be some consistency of doing the readings.
Willis, a well rehearsed and well written paper – as usual. Thank you.
Willis,great investigating work.Trois-Rivières shows that if anything is to be said about (relative) sea level (trend) all gauges in the proximity of rivers (and certainly three rivers) should be left out as river flooding and droughts will trouble the view on sea level readings, all the more if dams have been build in the observation period or islands created (like in Rotterdam the Netherlands where the Maasvlakte.was created in the sea at the estuary of the Rhine/Maas river system. As to your comment on land level changes: in the Netherlands the sinking level of the land is mainly through compression and dehydration of the (Holocene / organic) soil (may be more than 50 cm per 50 years e.g.in Flevoland).The tectonic rise and fall of the bedrock is only 1-3 cm per century.
Willis,
Like your patio! Many, many years ago I built one, a bit smaller, using soil cement for a base and el cheapo flat 1 inch cement pads. Also swept sand into the cracks…
Never heaved and stayed perfectly flat for many years.
Willis, I have been reading your nautical parables as well as your other mariner adventures for a few years now, as well as your climate research. I have only one explanation for people with your inherent skill-You are are a true Renaissance man, a Michelangelo re-incarnate if you will.
Thanks, cap. Growing up, Michelangelo was indeed one of my heroes, along with Jim Bridger, Thomas Edison, Nikolai Tesla, and George Washington Carver … your kind words are appreciated.
w.
Willis, one observation – if you would have used landscape cloth under the brick the weeds would be obvious. Plus, a diamond blade on an angle grinder would have made much nicer angle cuts.
less obvious
Thanks, Cap. I thought about putting down some kind of geotextile fabric … but then I realized I kinda wanted the plants growing up between. I may regret my choice … time will tell. The angle cuts were made with a brick wet saw. I thought about shaping the corners, but they’re concrete and not brick so they tended to crumble, so I let it go.
w.
“One of the oldest tide gauge benchmarks in the world is at Port Arthur in south-east Tasmania. When combined with historical tide gauge data (found in the London and Australian archives) and recent sea level observations, it shows that relative sea level has risen by 13.5 cm from 1841 to 2000.” [0.85mm/yr average for one and half centuries on ancient land that isn’t moving]
then-
“We have used a combination of historical tide-gauge data and satellite-altimeter data to estimate global averaged sea level change from 1880 to 2014. During this period, global-averaged sea level rose about 23 cm, with an average rate of rise of about 1.6 mm/yr over the 20th Century. The sea level record indicates a statistically significant increase in the rate of rise from 1880 to 2014”
hmmmm….add in all those PGR ones, etc
http://www.cmar.csiro.au/sealevel/sl_hist_few_hundred.html
and maybe we shouldn’t be talking about sea level but sea undulations?